I see far too much spend going to YouTube and Display placements, especially in Performance Max, and I’ve had accounts go wrong because of it. My usual fix has been placement exclusions, and lots of them.

From 15 October 2026, Google Ads is rolling out two new controls: channel prioritisation and budget allocation. For the Display side of the problem they’re a real step forward. But they don’t do everything people are already assuming they do, so here’s what they cover, what they don’t and how I’d use them.

Key takeaways

  • Google Ads now lets you set Search partners and the Display Network to high or low priority in Search, Shopping and Performance Max campaigns, rolling out from 15 October 2026.
  • Low-priority channels can be capped at a percentage of the average daily budget, and a 0% cap stops spend on that channel, although caps are best-effort rather than guaranteed.
  • In Performance Max, YouTube and Maps are grouped with Search, Gmail and Discover as Google channels, so channel prioritisation can’t cap YouTube or boost Maps on its own.
  • Priority only changes spend when a campaign is limited by budget, but a percentage cap applies either way, so for most lead-gen accounts the cap is the control that matters.
  • From February 2027, Search campaigns with Display switched on move to the new system; to keep today’s behaviour, set Display to low priority with a 50% allocation.

Quick answer: how to cap Display spend in Performance Max

Go to Admin, then Account settings, and open the Channel prioritisation card. Choose Performance Max, set the Display Network to low priority and give it a budget allocation, such as 0% to stop Display spend. Save, then check your placement reports after a week or two, because the cap is best-effort.

What’s changed

According to Google’s help page, you can now put channels into a high-priority or low-priority tier, and cap low-priority channels at a share of the budget. What you can control depends on the campaign type:

Campaign typeWhat you can prioritiseCan you cap spend?
SearchGoogle Search, Search partners, Display NetworkYes
ShoppingGoogle Search, Search partnersYes
Performance MaxGoogle channels (Search, YouTube, Maps, Gmail, Discover), Search partners, Display NetworkYes
Demand GenGoogle channels, Display NetworkNo, priority only

Google announced it on the Google Ads blog on 14 October, and the rollout starts on 15 October 2026. It’s gradual, so it may not be in every account yet.

How priority and budget caps work

  • High priority channels get the budget first. Every channel starts as high.
  • Low priority channels get what’s left. With Maximise conversions or Maximise clicks, they only spend if high-priority channels can’t use the budget. With Target CPA or Target ROAS, budget moves to them when they can convert at your target.
  • Budget allocation is an optional cap on a low-priority channel, set as a percentage of the campaign’s average daily budget. For example, 10% of a £50 daily budget is about £5 a day. 0% means no spend on that channel.
  • Caps are best-effort. Google aims to stay within them, but daily spend can go over. They reset each day and nothing carries over.
  • The catch: if a campaign isn’t limited by budget, priority makes no difference. The cap still applies, so for most lead-gen accounts the cap is the control that matters.
Recreated Google Ads channel prioritisation settings for Performance Max: Google channels at high priority, Search partners at low priority with a 10% allocation and Display Network at low priority with a 0% allocation.
Example data. Display set to low priority with a 0% allocation, and Search partners capped at 10%.

What it doesn’t do: YouTube and Maps in Performance Max

This is the part people will get wrong. In Performance Max, YouTube and Maps sit inside a group Google calls Google channels, together with Search, Gmail and Discover. That whole group has one priority. You can’t set YouTube to low priority on its own, and you can’t push Maps up either.

YouTube is where I’ve seen some of the strangest results. I had a fitness supplier running Performance Max who suddenly started picking up hundreds of YouTube subscribers overnight, and they were being counted as conversions. If that action had been set as a primary conversion, the campaign would have chased subscribers instead of customers, and it would have been awful.

So for YouTube, the existing checks still apply:

  • Make sure only real leads or sales are primary conversions. My guide to secondary conversions explains why.
  • Keep placement exclusions in place for poor placements.
  • For a small business that only wants leads, not awareness, I’d seriously question whether it needs YouTube at all. Search and Demand Gen campaigns still let you opt out of channels one by one, which Performance Max doesn’t.

For trades this matters more now that Local Services Ads are moving into Google Ads. If showing on Maps is important to you, make sure your Business Profile is linked so location assets can show, rather than expecting channel prioritisation to do it.

How to set it up

At account level:

  1. Go to Admin, then Account settings, and find the Channel prioritisation card.
  2. Choose the campaign type.
  3. Set each channel to high or low priority, and add an allocation to any low-priority channel you want to cap.
  4. Click Save.

To override this for one campaign, open the campaign’s Settings, expand Channel prioritisation and choose Use campaign-level settings.

  • It can’t be set from a manager account, so you’ll need to do it in each client account.
  • It isn’t in Google Ads Editor or the API yet.
  • With a shared budget, the setting applies to every campaign sharing that budget.

Not sure how much of your Performance Max budget is going to Display and YouTube? Request a free Google Ads review and I’ll show you where it’s going.

The settings I’d start with

There isn’t one right answer for every business, so think about the business first, make the change, and treat it as a test. Custom experiments support these settings, so you can A/B test them properly rather than guessing.

  • Lead gen in Performance Max: Display to low priority with a small cap, or 0% if Display has never produced a real lead. Then compare lead quality and cost per lead.
  • Search partners: low priority with a modest cap rather than switching them off, then judge them on cost per real lead.
  • Search campaigns: I still keep Display switched off. If you do use it, low priority with a cap is far safer than the old setup. Here’s why Search campaigns show on Display in the first place.
  • Ecommerce and awareness: Display and YouTube can earn their place, so test before cutting anything.

For me, this streamlines a lot of the placement exclusion work I do now. It doesn’t replace checking.

The February 2027 change for Search campaigns

From February 2027, Search campaigns with the Display Network switched on move to the new system automatically, and spend may shift between Search, Search partners and Display. Search campaigns using Target impression share will stop serving on Display altogether. If you want things to stay as they are, Google’s advice is to set Display to low priority with a 50% allocation. If you set priorities before then, they take effect straight away.

Check it’s working

After changing anything, compare spend and conversions by channel, and look at the placement report a week or two later. Caps are best-effort, and what you want to see is more real leads, not just lower spend.

My view

It’s a genuine step forward. Display leakage is one of the things I’ve spent the most time fixing in Performance Max lead-gen accounts, and now there’s a proper control for it. Just don’t assume it fixes YouTube, and don’t treat a cap as a guarantee. It’s also another reminder to check the defaults Google switches on, like automated promotions.

Want help with this?

If you’d like a second opinion on where your budget is going, send me an enquiry with a little context. I can review your channel and placement data, or manage the account for you.

Want to manage your account confidently yourself? I offer 1:1 Google Ads training for business owners and in-house teams, online or in person in Hampshire. See training options.

FAQ

What is channel prioritisation in Google Ads?

A setting rolling out from 15 October 2026 that lets you mark channels such as Search partners and the Display Network as high or low priority, so Google spends on high-priority channels first.

Can I stop Performance Max spending on Display?

Yes. Set the Display Network to low priority with a 0% budget allocation. The cap is best-effort, so check your placement reports afterwards.

Can I exclude YouTube from Performance Max with channel prioritisation?

No. In Performance Max, YouTube is grouped with Search, Maps, Gmail and Discover as Google channels, which can’t be prioritised separately. Use placement exclusions, clean primary conversions, or Search and Demand Gen campaigns for channel-level control.

What happens to Search campaigns with Display in February 2027?

They move to channel prioritisation automatically and spend may shift between Search, Search partners and Display. To keep today’s behaviour, set Display to low priority with a 50% allocation.

Sources (checked 15 October 2026): Google Ads Help: channel prioritisation and budget allocation · Google Ads blog announcement · Search Engine Roundtable · PPC Land

About the author: Michael is a Google Ads consultant based in Andover, working with businesses across Hampshire and the UK.

Free Review
Get A Free Google Ads Account Review
Get a quick expert review of your Google Ads account, with practical recommendations to reduce wasted spend and uncover missed opportunities.
Manual Review • No Obligation • UK-Based Google Ads Specialist

    Need support or a Google Ads review?

    For help with Google Ads, tracking, SEO or training, tell me what you’re working on and I’ll reply by email first.

    Or request a free Google Ads account review

    No pressure, no hard sell. Just a useful review of your account.